|
Organizational Meeting 7 pp
Synopsis of Presentation on Mechanical Component Malfunction (Orcutt)
4
Synopsis of Presentation on Servo Surveillance Program (Dean)
9
Mechanical Failure and Engineering Design (Fuller)
14
Spectrometric Oil Analysis (Ward) 15
Failure Indicator System Progress Report (Bergeson)
21
Equipment Malfunction Detection (Schlereth) 26
Comments on Improved Design Information and Life Margin (Decker)
30
Lubrication and Friction Research at Frankford Arsenal (Petronio)
1
Elastohydrodynamics and Wear (Fein) 3
Failure of Surface Films (Ling) 4
Fatigue Criteria (Manson) 4
Corrosion and Corrosion Fatigue (Williams) 6
Recent Research on Gear Lubrication for Reliable Operation (Avery)
7
Lubrication Failure Processes (Peterson) 9
Experimental and Analytical Investigation of Mechanisms of Failure
(Orcutt) 9
A Stochastic Model of Cumulative Damage (Kozin)
10
Shipboard Machinery Analyzer (Schlereth) 11
Study of the Geometry of Elastohydrodynamic Films in Point Contact
(Tallian and Hingley) 12
Progress on Failure Indicators (Wildmann) 13
Gyro Spin-Axis Ball Bearing TestingTesting
(Freeman) 14
Life Margin TestingTesting (Rumbarger)
15
A Study of Accelerated Life TestingTestingAccelerated Life Testing (Rabinowicz) 1
Turbine Engine Checkout and Status Control Techniques (Hamilton)
3
Transitions in Lubrication (Sternlicht) 4
Diagnostics in Aircraft Systems (Colburn) 8
Diesel Engine Maintenance Control by Oil Analysis (McGowen)
10
Jet Engine Diagnostic Equipment (Sollecito) 12
Development and Significance of the NAVWAPS Spectrometric Oil Analysis
Program as a
Maintenance System (Yesnes) 13
Cumulative Damage Relating to a Rational Procedure for Calculating Life
Distribution at the DesignStage (Gatts) 14
Development on an Improved Mathematical Model of Rolling Contact Fatigue
(Tallian) 18
Progress Report on Wear and Lubrication Failure of Mechanical Components
(Orcutt) 18
Lubrication of High Temperature Rolling Bearings (Parker)
20
A New Concept for Automatic Failure Detection and Its Application to
Automotive Diagnosis (Cortina) 21
Fatigue of Sea Water Piping System Components (Rekate)
22
Instrumentation for use in the Diagnosis of Mechanical Failures
(Janowiak) 22
Airborne Integrated Data Systems (Weis) 1
Some Failure Problems in Spacecraft and Space Boosters (Frankel and
Babecki) 4
A New Approach to Strength of Materials (Datsko)
5
Detection of Fatigue Cracks in the M113 - 175 MM Gun Tube (McEleney)
10
An Optical Means of Failure Signature Detection (Markevitch)
11
Electronic Techniques for Data ProcessingData Processing (Page) 14
Rolling Element Bearing Life Margin TestingTesting at FIRL and Correlation of Spectrometric Oil Analysis Results with Life
Results (Rumbarger) 15
Study of the State of the Art of Mechanical Failure Technology
(Peterson) 21
The Pro's and Con's of AIDS (Meador and Nemecek)
24
Design Improvement as a Means for Reducing Seal Failure (Hamilton)
30
Prediction of Percent Failures from Stress - Strength Interference
(Lipson) 31
Lubrication Chemistry and Its Relationship to Mechanical Failure (Klaus)
32
Failure Mechanisms in Deep Submergence (Craven)
33
Vibration/Acoustic Pickup Problems: Pros and Cons (Frarey)
1
Progress Report on Evaluation of Some Mechanical Wear Sensing Concepts
(Orcutt) 3
Data ProcessingData Processing and
Display for Malfunction Detection (Schlereth) 7
Advanced Diagnostic Concepts for Mechanical Failure Detection (Janowiak)
9
An Optical Means of Vibration Spectrum Analysis and Failure Signature
Detection (Markevitch) 12
Data ProcessingData Processing
Structures for Failure Detection, Diagnosis and Prognosis by Indirect Measurements
(Peschon) 13
Panel Discussion 15
Helicopter Operation After Loss of Normal Lubrication (Foulk)
2
Mechanical Failures of Navy and Marine Helicopter Transmissions and
Gearboxes (Conboy) 7
Current Research Efforts on Helicopter Transmissions (Bartone)
9
Solid LubricantsLubricantsSolid Lubricants for Helicopter Tail Rotor Boxes (Bowen)
11
Roller Bearing Failures Resulting from Lubricant Depletion (Derner)
14
Floating Aircraft Maintenance Facility (Shemanski)
15
Panel Discussion 16
Mechanical Failures in Navy Aircraft Turbine Engines (Hahn)
2
Critical Engine Failures Based on Disassembly Investigations (Ashley)
4
Reasons for Removal of Air Force Aircraft Engines (Calvert)
6
Jet Engine Problems Experienced by Commercial Operators (Kearns)
8
Operational Failures of the Helicopter Gas Turbine Engine (Gann)
10
Future Design Trends and Their Effect on Failure (Wood)
11
Panel Discussion 16
Foreign Object Damage to Turboshaft Engine Compressor Sections (Tobin)
17
Aircraft Transmission Failures (Dean) 20
The Importance of Ball Bearing Design Factors in Avoiding Failures
(Anderson) 22
Preliminary Experimental Results with Mist Lubrication and Failure Modes
for Shaft Seals (Johnson) 26
Panel Conclusion, Recommendations 31
The Design Process (Decker) 2
Designing to a Reliability Number (Gunkel) 5
Reliability Reinforcement in Design (Denhard) 8
Alternate Strategies of Resource Allocation (Gatts)
10
Detail Design - Microstrain (Maringer) 14
A Systematic Approach to Integrated Design (Showalter)
17
Overview of the Developing Information System in the USA (Murdock)
19
Information Sources for Designers (Peters) 20
Summary of Design Sessions 21
Acoustic Holography (Dau) 22
Characterization of Detection, Diagnosis and Prognosis in Failure
Prediction (Hohenberg) 2
Time Series Analysis Techniques (Davis) 5
Failure Detection and Diagnosis in Aircraft Gas Turbine Engines (Cake)
12
Fatigue Failure of Bellows Due to Flow-Induced Vibrations (Nelson and
Sack) 14
Shipboard Trial of Vibration Analysis Equipment to Determine Mechanical
Performance
(St. Germaine and Ellis) 16
Development of a Standard Glossary of Terms for Mechanical Failure
Prevention Efforts (Schlereth) 19
Automatic Inspection Diagnosis and Prognosis Systems (Laingor)
27
Detection of Incipient Failure by Use of Acoustic Emission (Harris)
28
NonDestructive Determination of Non-Electronic Part Reliability (Tobin)
30
Airborne Integrated Data Systems (Powers) 31
Automatic Test Equipment for Internal Combustion Engine Powered Materiel
(Brachman) 35
A Method for Detection of Fatigue Damage Using Positron Annihilation
Measurement (Gross) 36
Mechanisms of Fatigue (McEvily) 2
Applications of Fracture Mechanics in Fatigue Prediction (Paris)
4
A Conceptual Approach to Understanding Environment-Sensitive Mechanical
Behavior (Westwood) 5
Engineering Aspects of Materials Under Cyclic Loads (Reimann)
8
The Problem of Fatigue Failures in Thick-Walled Pressure Vessels
(Davidson) 10
Some Experiences in Aircraft Structural Fatigue (Renshaw)
14
Aircraft Jet Engine Rolling Contact Bearing Fatigue (Shevchenko)
14
Chemical Effects on Fatigue Damage to Bearing Elements (Schatzberg)
18
A Mathematical Model for the Prediction of Rolling Bearing Life
(Tallian) 20
Fatigue Behavior of Composite-Reinforced Aluminum Alloy (Illg)
26
Acoustic Emission Applied to Determination of Structural Integrity
(Hutton) 28
Incipient Failure Diagnosis by Use of Acoustic Emission (Dunegan)
30
Detection of Impending Metal Fatigue Failure Using an Inductive Sensing
Device (Moross) 30
Deformation Behavior During Elevated Temperature Low-Cycle Fatigue
(Krempl) 34
Study of Rolling Bearing Failure Mechanisms (Leonard and Sibley)
37
Microscopy of Fatigue Fracture (Danovich) 38
Mechanisms Committee Technical Summary (Davidson)
38
Failures of Diesel Engines in Naval Shipboard Service and Some Aspects
of the Revised Data Reporting System (Coulombe and
Anderson) 2
A Fleet Maintenance Officer Looks at Engine Failures (Kronberger)
5
Reliability Improvement of Small Engine Generator Sets (Horton)
9
Field Failure Data From the Army Reporting System (Rickerd)
16
Failure Experience with a Modern Automobile Fleet (Powell)
19
Failure Classification as an Aid for Failure Prevention in Diesel
Engines (Schmudde) 23
Use and Misuse of Lubricating Oil Analysis to Prevent Engine Failures
(Bates) 25
External Indicators of Internal Failures (Staton)
29
Vehicle Diagnosis in the Service Environment (St. John)
31
Advanced Support Concepts for Army Vehicles (Brachman)
33
What Designers Are - as a Rule (Maringer) 2
Standards - Basic to a Dynamic Technology (Fleischmann)
6
On the Role of Surface Finish in Friction & Lubrication (Fuller)
11
Wear-Induced Surface Changes and Their Effect on Bearing Behavior
(Glaeser) 24
The Correlation - (?) Between Surface Finish and Fatigue Life as Applied
to Machined Aircraft Surfaces (Hay and Thompson)
28
Discussion I 30
Roundness Control in Design (Lenz) 32
Surface Integrity and Failure Prevention (Kahles)
42
Rough Surface Statistics (Nayak) 50
Discussion II 51
Summary Discussion and Conclusions 53
Statistical Methods in Engineering Experimentation (McCool)
2
The Spectrographic Oil Analysis Program (S.O.A.P) as Used by a
Commercial Airline (Gunn) 7
Evaluation of Parameters Affecting the Low Cycle Fatigue Life of
Multispool Turbofan Engines (Van Nimwegen) 8
Panel - Use of Sonic Analyzer for Diagnostics 13
Streamlined L-1011 Fault Isolation Techniques (Eatherly)
18
Diagnostic System of the McDonnell Douglas DC-10 (Field)
20
Vibratory Velocity - A Measure of the Destructive Potential of Vibration
(White) 22
Quality Evaluation of Automotive D.C. Motors by Spectrum Analysis
(Curry) 22
Automatic Transmission Analyzer (Moross) 29
Application of Likelihood Analysis to Signature Extraction and
Malfunction Diagnosis (Chang) 34
Shock Pulse Instrumentation (Howard) 40
Brief Glimpses of New Advances 43
General Discussion 46
Army Corrosion Problems (Gallaccio) 2
Hot Corrosion Sulfidation (Reising and Cook) 3
Air Force Civil Engineering Corrosion Engineering Problems (Myers)
6
Stress Corrosion Cracking of Structural Materials (Boyd)
8
Corrosion Effects in Mechanical Failure; Corrosion Fatigue and Stress
Corrosion Cracking (Brown) 9
Stress Corrosion Cracking of Titanium Alloys in Methanolic and Other
Media (Kirkpatrick) 12
Adhesion, Friction, Lubrication and Wear Research by Modern Surface
Science Techniques (Keller) 13
Relationship Between Corrosion and Cavitation Phenomena (F. Peterson)
19
Influence of Deterioration on Catastrophic Failure of Critical
Components in Aircraft (Goldberg) 21
Field Experience with Rolling Bearing Corrosion (Mahncke)
24
Fretting (Peterson) 27
Electrochemical Wear Mechanism in Lubricated Systems (Beck, Mahaffey and
Olsen) 30
Role of Some Common Gaseous Corrodents in Boundary Lubrication (Kreuz)
33
Microcorrosion Studies with Functional Fluids (Klaus and Tewksbury)
36
Role of Corrosion in Adhesive Wear (Rowe) 39
Applications of Mathematical Modeling to Corrosive Wear (Beerbower and
Tao) 42
|
