 |
|
 |
|
|
|
|
|
PREFACE
MFPT SOCIETY BOARD OF DIRECTORS
FEATURED PAPERS
Failure Prevention in the 21st Century R. L. Eshleman
What Every Reliability Professional Should Know R. L Schuyler
DATA FUSION
Hydroelectric Generator Condition Monitoring: How Market-Driven Operation can Affect Unit Behavior T. J. Walter, G. B. Hirschman, M. K. Krikorian and A. J. Westmacott
Shipboard Demonstration of a Machinery Monitoring System L. D. Johnson and T. A. Merdes
Machine Learning Methods for Helicopter HUMS S. Menon and R. Hamza
Conceptual and Tool Advances in Machinery Preventive Diagnostics D. M. Ghiocel and J. Altman
Fusion-Based Prognostics/Diagnostics for Oil-Wetted Components in Gas Turbine Engines R. F. Orsagh, M. J. Roemer and C. J. Klenke
Application of Cluster Analysis for the Diagnosis of Rotating Machines L. del Castillo, M. Artes and J. C. Garcia-Prada
FAILURE ANALYSIS METHODS AND PRACTICES
Metallography…A Look Inside M. Pepi
Detection of Thermal Damage in X2M Steel Components Using Barkhausen Noise Analysis Techniques V. Champagne, P. Sincebaugh and M. Pepi
OPEN SYSTEMS ARCHITECTURE FOR CBM
A Framework for Next Generation Machinery Monitoring and Diagnostics M. Lebold, K. Reichard, P. Hejda, J. Bezdicek and M. Thurston
Open System Architecture for Condition-Based Monitoring – A CORBA/XML Implementation D. Gilbertson and B. Chidambaram
MIMOSA/OSA-CBM Proposed Information Standard Paves the Way for Wireless e-Diagnosticsä R. Lally and A. Rabiner
Autonomous Agent Architecture for Industrial Distributed Control F. Maturana, R. Staron, P. Tichy and P. Slechta
Pump Diagnostics Using an Open Systems Architecture F. M. Discenzo, D. Chung, J. Bezdicek, P. Hejda, D. Cernohorsky and O. Flek
FAILURE ANALYSIS LESSONS LEARNED
Chloride Contamination Leads to Tl-6AL-4V Blackhawk Compressor Impeller Failures W. Ziegler
Effects of the FLASHJETÒ Paint Removal Process on the Fatigue Properties of Al 7075-T6 and Al 2024-T3 J. Campbell, V. K. Champagne, S. M. Grendahl, W. W. Ziegler and J. E. Catalano
Diesel Engine Valve Failures D. Morehouse, J. Porter, J. Hiltz and M. Brauss
INDUSTRIAL CASE HISTORIES I
Industrial Case Histories K. R. Guy
PROGNOSTICS
Integrating Prognostic Modules into Existing Naval CBM Systems C. S. Byington, M. J. Roemer, M. J. Watson, K. Grieb, M. S. Lebold, J. C. Banks and T. Galie
Enhancing Gear Physics-of-Failure Models with System Level Vibration Features G. J. Kacprzynski, M. J. Roemer, C. S. Byington, G. A. Modgil, A. Palladino and K.P. Maynard
Development of the Asset Health Management System for the Marine Corps Advanced Amphibious Assualt Vehicle J. C. Banks, K. M. Reichard and M. S. Brought
Probabilistic Modeling Techniques for Optimal-Cost Risk-Based CBM Strategy D. M. Ghiocel
Using Modeling to Predict Vibration from a Shaft Crack J. H. Maxwell and D. A. Rosario
GEAR DIAGNOSTICS
Spur Gear Root Fatigue Crack Prognosis via Crack Diagnosis and Fracture Mechanics C. J. Li and S. Choi
Gear Crack Detection Using Tooth Analysis H. J. Decker
Principal Components Analysis of Triaxial Vibration Data from Helicopter Transmissions I.Y. Tumer and E. M. Huff
A Comparison of Residual Signal Extraction Techniques for Gear Fault Detection – Physics and Signal Processing K. M. Reichard, K. T. McClintic and M. S. Lebold
Evaluation of Standard Gear Metrics in Helicopter Flight Operation M. Mosher, A. H. Pryor and E. M. Huff
Detection of Gear Tooth Pitting Using Instrumental Variable Autoregressive Modelling W. Wang
SENSORS
0Wireless LAN Technology for Prognostics and Health Monitoring G.W. Nickerson and L. Watt
An Intelligent Wireless Data Gathering System for Condition Based Maintenance C. McLean and D. Wolfe
Fiber Optic Sensors for Health Monitoring of Machinery, Infrastructure and Aircraft K. R. Cooper, B. A. Childers, S. Poland, K. Furrow, T. Wavering and K. A. Murphy
Machinery Sensor and Control System Failures – A Case History and Analysis R. C. Tate and C. P. Nemarich
Feasibility of Corrosion Sensors for Condition Based Maintenance of Depleted Uranium Penetrators (from MFPT 55) P. F. Buckley and J. V. Kelley
THE BUSINESS CASE FOR CONDITION BASED MAINTENANCE
Real Options Analysis as a New Economic Tool Linking CBM Investments to Business Strategy F. M. Discenzo
Enhanced Reliability Analysis and Capabilities of the Turbo-X Program for Maintenance Optimization R. Orsagh, M. J. Roemer and S. Hesler
Predictive Maintenance – The Effect on a Company’s Bottom Line Part 1 – The Global View B. Johnson and J. H. Maxwell
Part 2 – Calculating Avoided Cost B. Johnson and J. H. Maxwell
DIAGNOSTIC TECHNIQUES
Condition Monitoring for Life Extension of Fast, High Density Battery Charging J. D. Kozlowski, T. A. Hay, A. K. Garga and M. J. Watson
Examination of Successful Modal Analysis Techniques Used for Bladed-Disk Assemblies R. F. Orsagh and M. J. Roemer
The Future Role of Current Analysis in Predictive Maintenance N. P. Bethel and J. R. Nicholas, Jr.
Prediction of Machine Performance Using Recurrent Neural Networks M. A. Essawy
INDUSTRIAL CASE HISTORIES II
Vibration Cases by Classifications C. Jackson
May the Force NOT be With You C. Jackson
AUTHOR INDEX |
vii
viii
3
13
29
39
49
57
67
81
93
103
115
127
139
147
157
169
179
189
205
253
263
277
287
299
311
321
331
343
353
367
377
389
399
409
417
429
439
453
469
485
495
507
517
527
553
563 |
