Why not join our Corporate Members?
Sign Up Here

Home > MFPT 2015 > List of Exhibitors

List of Exhibitors - Click a Logo to View Company Details

 



Booth B

1219 W. Main Cross St. Suite 201
Findlay, OH 45840
Contact: Joe Suter
Telephone: (419) 957-0543
Email: jasuter@endurica.com
Web Site: www.endurica.com

Endurica LLC develops the world’s most versatile and best-validated fatigue life simulation system for elastomers. It is a simulation software that empowers its users to analyze the fatigue performance of elastomers under real-world service conditions. This is done at the design stage, when the greatest opportunity exists to influence performance, and before investment in costly fatigue testing of prototypes. Endurica estimates the fatigue life of a rubber component. Based on the mechanical duty cycle computed in the Finite Element Analysis, and a specification of the rubber’s material properties, it computes the number of repeats of the duty cycle that are required to produce a small crack at each location within the component. The duty cycle is read from the finite element model as a time domain signal specifying the components of the strain tensor. After computing the fatigue life for each element, the results may be visualized as color contours showing the critical locations where cracks will initiate.

Top of Page

 




Booth A

Viewpoint Systems 
800 West Metro Park
Rochester, NY 14623
Contact: David LaVine
Telephone:  (585) 475-9555
Email: ConditionMonitoring@viewpointusa.com
Web Site: www.viewpointusa.com

Predictronics
1000 Ford Circle, Suite A
Milford, OH 45150
Contact: Edzel Lapira
Telephone: (513) 680-1662
Email: contact@predictronics.com
Web Site: www.predictronics.com

Viewpoint Systems has capabilities in condition monitoring in diverse applications (see Structural Health Monitoring and CM for Electric Power Generation), however, through a partnership with Predictronics we are taking condition monitoring into the realm of predictive analytics and prognostics and health management, leveraging Predictronics deep domain expertise in areas such as: data reduction and analysis;  intelligent algorithm development; the integration of predictive functions into existing systems; the visualization of results and decision support.

Viewpoint focus areas:
          ·         Signal conditioning
          ·         Data acquisition and aggregation
          ·         Pre-processing

Predictronics focus areas:
          ·         Analytics
          ·         Visualization
          ·         Alerts

Do you have an off-the-beaten path problem to solve?  Are you looking to innovate but aren’t sure if you can justify it?  Throw a challenge our way.

Top of Page

 

Booth E

14 Hayes Street
Elmsford, NY 10523
Contact: Helen Clint
Telephone: 800-223-1325
E-mail: info@uesystems.com
Web Site: www.uesystems.com

UE Systems manufactures and supports ultrasound instruments used for condition monitoring and energy conservation programs.   These portable instruments are used to locate electrical faults such as arcing, tracking and corona, early warning signs of faulty bearings, find compressed gas and vacuum leaks as well as test for faulty steam traps and valves.

Top of Page

 
Booth C

240 Cherry Street
Ithaca, NY 14850
Contact: Doug Firth
Telephone: 607-277-3550
E-mail: doug@pfinc.com
Web Site: www.pfinc.com

Founded in 1975, Precision Filters, Inc. (PFI) is a manufacturer and global distributor of high performance instrumentation for test measurements. PFI designs and manufactures precision product solutions that include a family of analog signal conditioning, filtering and switching systems. Recently added capabilities include signal conditioning modules for use in National Instruments™ C-Series platform.  Choose from four different modules to measure charge, bridge, dynamic strain, IEPE or voltage-based sensors. Count on PFI’s dependable signal conditioning technology for precise measurements.

All modules feature fully programmable gain and excitation and are equipped with Precision Filters’ Test Input for inserting calibration signals at the module input allowing full end-to-end verification. Real time sensor parametric health is continuously measured and reported “on-the-fly”. The desired module power-up state may be saved to non-volatile memory enabling use in CompactDAQ™ systems.

Top of Page

 

Booth D

271 Grove Avenue, Building G
Verona, NJ 07044
Contact: Chris Wilcox
Telephone: 973 239 3005
Email: chris.wilcox@mpina.com
Web Site: www.mpihome.com

Product designers and test engineers throughout the world trust m+p international for reliable noise and vibration analysis, structural dynamics, vibration and acoustic control. On display will be m+p’s Smart Office Analyzer and Vibco with VibPilot 24, and VibRunner measurement hardware along with new data acquisition and control Methods for Force Limited Vibration Testing.

Top of Page

Booth N

21592 Marilla St
Chatsworth, CA 91311-4137
Contact: Kaitlin Mitchell
Telephone: (818) 700-7818
Email: kmitchell@dytran.com
Web Site: www.dytran.com

Founded in 1980, Dytran Instruments, Inc. is a leading U.S. manufacturer and designer of piezoelectric and DC MEMS sensors for static and dynamic acceleration measurements. Dytran offers a complete range of impulse hammers, piezoelectric force sensors, pressure sensors, electronics, cables, accessories and full in-house customization capabilities. Dytran's product range includes miniature and triaxial accelerometers, high temperature sensors, DC sensors, and sensors with built-in TEDS capabilities. Dytran sensors have become among the industry's most popular choices for diverse applications including HUMS and Condition Based Maintenance as well as airborne and high temperature engine testing.

Top of Page

 

Table 4

The British Institute of Non-Destructive Testing (BINDT)
Newton Building
St. George’s Avenue
Northampton NN2 6JB
United Kingdom
Contact: Cameron Sinclair
Telephone: +44 1604 893817
Email: cameron.sinclair@bindt.org
Web Site: www.bindt.org

BINDT is a UK-registered charity  and a professional engineering institute.

BINDT’s mission is to promote the advancement of the science and practice of non-destructive testing (NDT), condition monitoring (CM), diagnostic engineering and all other associated materials and quality testing disciplines.

BINDT provides a platform for leadership in our chosen branch of engineering and undertakes a number of activities, under a number of brands and in conjunction with a variety of stakeholders that can be generally and collectively labelled ‘education and professional development’.  Specifically, the Institute’s propositions are:

  • Awards and Recognition

  • Branch Meetings

  • Certification

  • Conferences and Events

  • Education and Professional Development

  • Membership

  • Publications

  • Registration (of engineers with the UK Engineering Council)

The benefits to the public of BINDT’s activities can be summarised as follows:

  • Safer plant and equipment.

  • More reliable plant equipment, and improved environmental impact.

  • Growth, in economic terms.

Top of Page

 


Booth M

10 High Street, Suite K
Wakefield, RI 02879
Contact: Jennifer Vazquez
Telephone: 401-284-3750 21592
Email: jen.vazquez@dewamerica.com
Web Site: www.dewamerica.com

Sensors can’t do anything unless you connect them to a measuring system, and Dewetron makes the most versatile data acquisition instruments in the world.  Dewetron offers ISOLATED signal conditioning for virtually every kind of sensor, and high resolution A/D modules that can digitize your data at rates up to 10 MS/s/ch. Real galvanic isolation means low noise, fewer measurement errors, and elimination of ground loop problems. Dewetron sells stand-alone conditioning – such as our DAQP and EPAD2 modular conditioners, which have convenient LabVIEW™ and serial port drivers for easy integration into any system. And they also offer completely integrated systems, with conditioning, A/D converters, and a built-in or external computer/storage system. Dewetron systems are OPEN, which means that you can use our turn-key software and be running in minutes, or you can use our drivers and create any system that you can imagine, for every application.

Top of Page

Booth I

8201 Hermitage Rd
Richmond, VA 23060
Contact: Danielle Huot
Tel: 804-261-3300
Email: danielle@spectraquest.com
Website: www.spectraquest.com

SpectraQuest is the leading developer and manufacturer of turn-key systems for education and research in machine condition monitoring and diagnostics/prognostics, wind energy, and engineering education. We provide a wide variety of drivetrain diagnostics/prognostics simulators and a full line of machinery fault simulators, and a scale model of utility size wind turbine. SpectraQuest provides complete infrastructure for enhancing workforce skills in wind turbine operation & maintenance, machine condition monitoring, industrial maintenance and reliability. Product line includes multi-channel portable affordable compact data acquisition system with advanced software for machine diagnostics and root cause analysis

Top of Page

 


Booth F

3425 Walden Ave
Depew, NY 14043
Telephone: (800) 959-4464
Fax: (716) 684-3823
E-mail: imi@pcb.com
Web Site: www.imi-sensors.com

IMI Sensors, a division of PCB Piezotronics is the pioneer of ICP® technology, and is the world’s largest manufacturer of industrial vibration monitoring instrumentation. IMI’s fast delivery, Platinum Stock Products are covered by an Unconditional Guarantee and ensure 100% satisfaction or your money back. Visit IMI at www.imi-sensors.com.

Top of Page

Booth H

11500 N. MoPac Expressway
Austin, TX 78759
Contact: Tiffany Fogarty
Telephone: (512) 683-6816
E-mail: info@ni.com
Web Site: www.ni.com/insightcm

For more than 15 years, National Instruments has provided tools and solutions for asset condition monitoring applications spanning power generation, oil and gas, mining, transportation and heavy equipment, and manufacturing. Our extensive offering of products for machine diagnostics, online predictive maintenance, and test cell applications includes USB, PCI, and PXI acquisition devices and programmable automation controllers. It also includes software for vibration analysis and prognostics, available in both an interactive configuration-based environment and the NI LabVIEW graphical programming environment.

Top of Page



Booth K

11 Apollo Drive
Whippany, NJ 07981
Contact: Bill Marscher
Telephone: (973) 326-9920
Fax: (973) 326-9919
E-mail: wdm@mechsol.com

Web Site: www.mechsol.com

MSI is a turbomachinery design & development company that specializes in turbines, compressors, fans, and pumps for the power, API, and aerospace industries.  Advanced diagnostic sensor development (such as microwave-based blade tip frequency response sensors) as well as diagnostic/ prognostic system development (e.g. MSI's Sentry<TM> system) are examples of typical projects.  In addition, MSI performs detailed FEA, CFD, and lateral and torsional rotordynamic analysis of complex turbomachinery rotors and casing/ frame assemblies.  Ship-to-shore encrypted (with high degree of Information Assurance) communications to facilitate mid-ocean diagnosis of equipment, as well as video-based systems to track MANPADS missiles show the breadth of MSI's DoD project interests and successes.  For industry, turbomachinery on-site rapid troubleshooting is an MSI strength.

Top of Page

 

Table 3

9910 Kay Meg Way
Knoxville, TN 37922
Telephone: (865) 765-3864
Web Site: www.emergingmeasurements.com

Top of Page 



Booth L

 

6555 Pelican Creek Circle
Riverview, FL 33578
Contact: Timothy Deschaines
Telephone: (813) 316 4766
E-mail: tdeschaines@metrohmusa.com

Web Site: www.metrohmusa.com

 

Metrohm is a leading manufacturer of high-precision instruments for chemical analysis. We offer a complete line of analytical laboratory and process systems for titration, ion chromatography, spectroscopy, and electrochemistry.

Top of Page




Booth G

1741 Technology Drive, Suite 260
San Jose, CA 95110
Contact: Bourke MacDonald
Telephone: (408) 437-0100
E-mail: sales@dataphysics.com
Web Site: www.dataphysics.com

Established in 1984, Data Physics is a leading global supplier of high performance noise and vibration test solutions. Data Physics offers dynamic signal analyzers, closed-loop vibration controllers, electrodynamic shakers and accessories, and specialty acoustics products and services. SignalCalc Turbo is the turbomachinery vibration analyzer from Data Physics that delivers top-tier machinery diagnostics capability in a straightforward, easy to use package. SignalForce Electrodynamic Shakers are offered in a wide force range for nearly any engineering application. Innovative features such as multi frequency sine control keep SignalStar Vibration Controllers on the cutting edge of technology. SignalCalc Dynamic Signal Analyzers provide the best in performance for portable measurement as well as large channel count acquisition and analysis. Data Physics manufactures hardware and software with its full line of products. More than 5000 Data Physics systems are installed worldwide at all leading Automotive, Aerospace, Military & Defense, Industrial, Consumer Electronics Manufacturers and Educational Institutions.

Top of Page 



Booth J

 

Top of Page

 

 

Table 2

 

Top of Page


Table 1

 

301 Sparkman Drive, VBRH D-10
Huntsville, AL 35899
Contact: Chris Sautter
Telephone: (256) 824 6147
E-mail: chris.sautter@uah.edu

Web Site: http://www.uah.edu/rfal

 

This Exhibitor slot represents the Reliability and Failure Analysis Lab (RFAL) at the University. We are heavily involved in failure analysis and HUMS analysis. We are currently using a probabilistic algorithm to produce "actionable information" from raw HUMS data coming from aircraft. The booth will have representatives of the HUMS team along with the output of the algorithm.

 

Top of Page



 

 
 
The Society for Machinery Failure Prevention Technology is a Division of the a not-for-profit corporation

follow us on